PFA tube is made from PFA resin and prepared by the technology of
thermoplastic extrusion and blowing. It has non-sticking,
heat-resistance, aging resistance, corrosive resistance,
non-flammability and good electric property.It can be solid adhesive for PTFE and also a good adhesive for
laminating various materials. Its working temperature is up to 260 and is an ideal material for circuit board
and flat cable.
For our fast response ,pleasae kindly get contact with us directly
by e mail, not leave message in web.
PFA ( shrink) tube's usage :
Office-work machine 's roll packing
paper machine's roll packing
printing and dyeing machine's roll packing
printing machineroll packing
the main insulation of rotor of the electric instrument
make the magma sample in the field of oil field ect.
UV lamp protecting
1.customized as per client's requirement
2.thinest, smallest and precision parts produced
Working temperature: -80-260 centigrade
Flame retadant: V-0
Very low friction coefficient
Exceptional insulating properties
Extremely corrosion/chemical drug resistant
Pipe coupling fittings
medical device parts
PFA valve seat,
PFA tee coupling,
PFA valve spare parts
PFA tube fitting
PFA sealing ring
PFA valve seat
PFA ball valve seat
PFA injection products
FEP & PFA has perfect anticorrosive properties and heat
resistance and electric resistance. they are widely used in the
fields of electrical,petrochemical,industrial,IT industrial.They
are the perfect material so making VU lamp protection tube,
PFA is both transparent to UV-A and UV-C light and totally
resistant to it as well as being temperature resistant. Therefore
,it makes an excellent material for shatter proofing UV lamps used
in the food industry where glass free areas are required. Other
plastic voerings enbrittle or discolour under the effect of the UV
radiation . If the lamp suffers damage ,the glass is contained in
teh shrunk on jacket.
Linear Lamps of any Size.
Circular and other shapes.
Fitted boots for U shaped lampes.
Low light transmission loss
Loss of UVA AND UVC light is much less compared with other polymer
coatings. For our usual coatings,loss of UVA is arround 4% and UVC
is 11%.We know of no other suitable flexible coatings that provide
less loss of UV.
High low temperature resistance:
-200--260°C,high temperature strength is 2 times higher than PTFE
Good adhesive and heat sealability with PTFE:
Below melting point ,it won’t stick any project.Above melting point, it has perfect adhesive
property with PTFE, Metal and self-adhesion(heat sealing).
None stick to water ,oil :water contact angle:θ=1150o
Electric reliability,High dielectric
60HZ-60MHZ,Under the high and low temperature,thepermittivitykeeps2.1even if the surface damaged ,it won’t has conductive track.
Voltaic Arc Resistance>165sNo electric leakageWeather resistance:It can be used in sunlight and ozone long
Anti-corrosion:Only in high temperature, Fluorin and alkalis can effect it,others
acid,alkali or ester won’t effect it.
Fireproof :If firing, and will still insulate .
UL-Resistance :Good penetrability in ultraviolet radiation,and lowest refraction
Technical index of PFA:
|General purpose||Electric purpose|
|Temperature range°C||-200 -+260||-200 -+260|
|Longi&tray,shrink rate %≤||3.0||3.0|
|Tensile strength Mpa ≥||14||14|
|Elongation at break %≤||175||175|
|Tear Strength (N/m) ≥||4.9x104||4.9x104|
|Dielectric Constanct (106Hz)||2.15|
|Dissipation Factor 106Hz≤||1x10-3|
|Volume resistance (Ω.m)||1x1014|
Plastic bag &carton . Customized is acceptable