Fluorinated ethylene-propylene resin, as a copolymer of
tetrafluoroethylene and hexafluoropropylene, has good heat
stability, outstanding chemical inertness, excellent electrical
insulation and low friction coefficient, and can be processed by a
thermoplastic processing method. DS608 resin with low molecular
weight and high melt index has low extrusion temperature, high
extrusion velocity (5-8 times of common FEP resin), and good
flexibility, fold resistance and tenacity.
For our fast response ,pleasae kindly get contact with us directly
by e mail, not leave message in web.
Translucent particle, scrap metal, sand and other impurities cannot
be mixed, particles with visible dark spots cannot exceed 2%
Tensile strength, ≥
Elongation at break, ≥
Dielectric constant(106 HZ), ≤
Dielectric loss factor(106 HZ), ≤
Volatile matter, ≤
Hot stress crack resistance
Mainly used for aviation, aerospace, subway vehicles, automatic
switchgears, oil well testing equipment, fire alarming system,
high-rise buildings, near fire zone wires, cables, computers,
communication network and electricity, especially high-speed
extrusion small-bore wire insulation materials. More economic for
most purposes without needing high stress crack resistance.
Avoid processing at above 420℃ to prevent decomposing and
generating toxic gas.
Packaging, Transport and Storage:
1. It should be packaged in two-layer plastic inner bag, and then
sealed in outer packing plastic bag. Each bag has net weight of
25kg and certificate of approval.
2. It should be stored in a clean, dry, cool and shady environment
to prevent mixing of impurities.
3. It is nontoxic, non-inflammable, nonexplosive and noncorrosive,
so it is transported according to non-dangerous goods.